Cartridge name:
Audio Technica AT-VM530xEN
Features:
- AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus
- 0.3 x 0.7 mil elliptical nude stylus tracks the record groove with accuracy for outstanding audio reproduction
- Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove
- Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response
- PCUHD (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response
- Centre shield plate between the left and right channels reduces crosstalk for clear stereo sound
- Threaded inserts make cartridge easier to mount, especially to integrated tonearms
- V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record
- Durable low-resonance polymer housing
- Aluminium cantilever
- Compatible with any turntable headshell that accepts 1/2" cartridges
- Compatible with most AT-VMx series replacement styli,* offering a wide choice of options for every budget and application
Specifications:
| Frequency Response |
20 to 25,000 Hz |
| Channel Separation |
25 dB (1 kHz) |
| Vertical Tracking Angle |
20° |
| Tracking Force |
1.8 to 2.2 g (2.0 g standard) |
| Stylus Construction |
Nude elliptical |
| Recommended Load Impedance |
47 k ohms |
| Coil Impedance |
3.2 k ohms (1 kHz) |
| DC Resistance |
750 ohms |
| Coil Inductance |
480 mH (1 kHz) |
| Output Voltage |
3.2 mV (1 kHz, 5 cm/sec.) |
| Output Balance |
1.5 dB (1 kHz) |
| Cantilever |
Aluminium pipe |
| Static Compliance |
23 × 10-6 cm/dyne |
| Dynamic Compliance |
7 × 10-6 cm/dyne (100 Hz) |
| Dimensions |
28.0 mm (1.1”) × 18.3 mm (0.72”) × 17.6 mm (0.69”) (L × W × H) |
| Accessories Included |
Cartridge installation screws** (M2.6) (10.0 mm (0.39”) × 2, 8.0 mm (0.31”) × 2, 5.0 mm (0.20”) × 2), washer × 2 |
| Threaded Hole |
M2.6 × 2 |
| Recommended Load Capacitance |
150 to 250 pF |
| Replacement Stylus |
AT-VMN30xEN* (sold separately) |
| Stylus Curvature Radius |
0.3 × 0.7 mil |
| Type |
VM |
| Weight |
7.2 g (0.25 oz) |
For more information refer manufacturer website:
https://www.audio-technica.com/en-gb/at-vm530xen
