Tonearm Head

Tonearm Head
Here you will find:
Carrier Plate
Dual Part Number:
249319
Used in Dual Models (without guarantee):
CS714, CS731
19,00 EUR
 
incl. 19% tax excl. Shipping costs
Cartridge Gauge
Dual Part Number:
274100
Gauge for adjustment of cartridges in the following Dual tonearm heads:
Fix tonearmheads:
270534, 271784
Changeable Headshells:
275361, 277955, 277956, 280554, 282542, 282611, 286251
Dual turntables with the above listed tonearm heads are:
ASP120, CS130, CS138, CS430, CS431, CS435, CS425-1, CS450, CS455, CS455-1, CS503-1, CS503-2, CS505-2, CS505-3, CS505-4, CS511, CS514, CS515, CS520, CS525, CS530, CS610, CS616, CS620, CS630, CS2210, CS2215, CS2225, CS2235
15,00 EUR
 
incl. 19% tax excl. Shipping costs
TK24 Cartridge Holder
Dual Part Number:
236242 original, from actual production lot
Used in Dual Models (without guarantee):
CS461, CS481, CS491, CS502, CS504, CS510, CS521, CS604, CS621, CS704, CS721, CS1234, CS1235, CS1236, CS1237, CS1239, CS1241, CS1242, CS1245, CS1246, CS1249
Can be also used as substitute for a TK14 in the following models:
CS601, CS701, CS1209, CS1210, CS1211, CS1214, CS1215, CS1218, CS1219, CS1220, CS1222, CS1224, CS1226, CS1228, CS1229


Our special Service:
If you order the TK24 in combinatrion with a pick up cartridge from our webshop (refer here: http://www.dualfred.de/Tonearm-DIY-drive-bearing-accessories/pickup-cartridge/ ), we install the cartridge to the TK24 and adjust it correctly according Dual specification. Please add in this case at the order form "assemble cartridge to adapter".
32,00 EUR
 
incl. 19% tax excl. Shipping costs
TK27 Fastening
Dual Part Number:
266606
Used in Dual Models (without guarantee):
CS714, CS731 for cartridge MCC110
45,00 EUR
 
incl. 19% tax excl. Shipping costs
TKS to Half Inch Adaptor MK3
Dualfred Part Number:
300107-3
Fits into Dual Models with TKS-mount (without guarantee):
CS130S, CS496-1, CS505, CS505-1, CS506-1, CS508, CS528, CS607, CS608, CS617, CS627, CS628, CS708, CS728, CS741, CS1254, CS1258, CS1268
Description:
The Dual models listed above have the special Dual-TKS-Mount. Without an adaptor, only cartridges with this special mount can be installed in these models. And TKS-cartridges are quite rare already. By using the offered TKS-Half-Inch-Adaptor, you can install standard cartridges with 1/2" mount in these turntables. Depending on the cartridge weight, it might be necessary to install a weight plate at the counter weight of the tonearm. This weight plate is included in the delivery content.

This Half Inch Adaptor is a copy of the original Dual TKS-Adaptor. The top plate is a replica of the original TKS-mount. So it fits directly to the above mentioned Dual turntable models. The TKS-mount plate is made of the high tech plastic material PA 6.6 on a CNC milling machine. So it has much higher strength than the original Dual part. This is not a cheap 3D-printed part! The contact pins to the tonearm head are made of gold plated brass material. This creates very low and long term stable contact resistance values. The cartidge cables are equipped with correctly dimensioned cartridge plugs, which are professionaly crimped to the cables. Not soldered plugs with shrinking hoses, like at some cheap DIY solutions! The Aluminum mounting plate with the 1/2" mounting holes is also a Dualfred design.

The outside dimensions of the adaptor are the same like the original Dual part. So the Dual adjustment gauge 274100 can be used for cartridge adjustment.

Our special Service:
If you order the TKS-Half Inch Adapter in combinatrion with a pick up cartridge from our webshop (refer here: http://www.dualfred.de/Tonearm-DIY-drive-bearing-accessories/pickup-cartridge/ ), we install the cartridge to the adapter and adjust it correctly according Dual specification. Please add in this case at the order form "assemble cartridge to adapter".
89,00 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 8 (from a total of 24 products)