Main page » Dual Tonearm » Cables

Cables

Here you will find:

Dualfred Part Number:
236402S, fully compatible to Dual 236402
Used in Dual Models (without guarantee):
CS522, CS704
Description:
The original muting switch 236402 is riveted in the center. This rivet breaks easily, even at new parts from old stock. The offered muting switch 236402S is reinforced with a screw in the center.

19,00 EUR

incl. 19% tax excl. Shipping costs

Muting Switch modified

Dualfred Part Number:
232987S, fully compatible to Dual 232987
Used in Dual Models (without guarantee):
CS521, CS601, CS1228, CS1241, CS1242, CS1245, CS1246, CS1249
Description:
The original muting switch 232987 is riveted in the center. This rivet breaks easily, even at new parts from old stock. The offered muting switch 232987S is reinforced with a screw in the center.

19,00 EUR

incl. 19% tax excl. Shipping costs

Phono Cable

Dual Part Number:
272908
overall length ~ 1,2m
Used in Dual Models (without guarantee):
CS455, CS460, CS505-4
This phono cable can be used to convert old Dual turntables from DIN to Cinch. It has gold plated plugs and the other end is prepared for direct soldering. The cable diameter is almost the same as the old Dual DIN cable. So it will easily fit to the existing cable output. For a complete conversion you need also a seperate ground cable, which is available here: www.dualfred.de/Tonearm/Cables/Ground-Cable-300122-en.html

15,00 EUR

incl. 19% tax excl. Shipping costs

Phono Cable

Dualfred Part Number:
285248NB replica of the Dual phono cable
Used in Dual Models (without guarantee):
Golden 1, CS750, CS750.1, CS5000

29,00 EUR

incl. 19% tax excl. Shipping costs

Shielding Cover

Dual Part Number:
236080
Used in Dual Models (without guarantee):
CS461, CS502, CS504, CS505, CS505-1, CS505-2, CS506, CS508, CS510

6,00 EUR

incl. 19% tax excl. Shipping costs

Shielding Cover

Dual Part Number:
281057
Used in Dual Models (without guarantee):
CS505-4

6,00 EUR

incl. 19% tax excl. Shipping costs

Tonearm Cable

Dual Part Number:
261929
Used in Dual Models (without guarantee):
The cable 261929 is for universal use. It fits to all turntable (also non Dual), which are wired directly to the cartridge. The small plugs at the ends are fitting to the standard cartridge pins.
Cable length is ~ 40cm (15.7")

15,00 EUR

incl. 19% tax excl. Shipping costs

Tonearm Cable with Terminal Plate

Dual Part Number:
223005
Used in Dual Models (without guarantee):
This cable was used in Dual turntables until the early 70s. The terminal plate is designed for turntables, which were equipped with TK14 and TK15 Headshells from Dual.
The shielded cable type of 223005 was changed by Dual into 4+1 single wires, when the quadrosound was invented. Quadrosound technology needed lower cable capacity. As it uses signals up to 50kHz. For stereo sound, the cable 223005 is still an excellent solution.
Cable length is ~ 38cm (15")

15,00 EUR

incl. 19% tax excl. Shipping costs

Show 9 to 16 (from a total of 16 products)